<?xml version="1.0" encoding="UTF-8"?><rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/"><channel><title>Asked 3D</title><description>Short, verified answers to specific 3D printing questions. One question per page, with the number, step or condition a generic answer leaves out.</description><link>https://asked3d.com</link><language>en-us</language><atom:link href="https://asked3d.com/rss.xml" rel="self" type="application/rss+xml"/><lastBuildDate>Sat, 07 Nov 2026 00:00:00 GMT</lastBuildDate><item><title>How do you block supports in a specific area?</title><link>https://asked3d.com/answers/block-supports-in-one-area</link><guid isPermaLink="true">https://asked3d.com/answers/block-supports-in-one-area</guid><description>Put a support blocker on the overhang: Cura&apos;s Support Blocker tool (E), or right-click, Add support blocker in PrusaSlicer, Bambu Studio and OrcaSlicer, or paint it (L).</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>How do you add tree supports?</title><link>https://asked3d.com/answers/how-to-add-tree-supports</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-add-tree-supports</guid><description>OrcaSlicer: Support tab, tick Enable support, Type Tree (auto). Bambu Studio: tree(auto). PrusaSlicer: Style Organic (since 2.6). Cura: Support Structure Tree.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>How do you remove 3D print supports?</title><link>https://asked3d.com/answers/how-to-remove-3d-print-supports</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-remove-3d-print-supports</guid><description>Let the print cool, tear the support out with pliers from a corner, peel the interface off and sand the scar. Bambu Lab says within 2 hours; wear safety glasses.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category></item><item><title>What overhang angle needs support?</title><link>https://asked3d.com/answers/overhang-angle-for-supports</link><guid isPermaLink="true">https://asked3d.com/answers/overhang-angle-for-supports</guid><description>Past 45° from vertical, by the 45° rule. Bambu Studio&apos;s 30° and PrusaSlicer&apos;s 35° count from horizontal (60°, 55° from vertical); Cura&apos;s 50° counts from vertical.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>overhangs</category><category>slicer-settings</category></item><item><title>Why are PETG supports so hard to remove?</title><link>https://asked3d.com/answers/petg-supports-hard-to-remove</link><guid isPermaLink="true">https://asked3d.com/answers/petg-supports-hard-to-remove</guid><description>PETG bonds to itself, so its supports fuse across the default 0.2 mm gap. Raise Top Z distance 0.05 to 0.1 mm at a time, or print the interface in PLA at 0 mm.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>petg</category></item><item><title>Can you print overhangs without supports?</title><link>https://asked3d.com/answers/print-overhangs-without-supports</link><guid isPermaLink="true">https://asked3d.com/answers/print-overhangs-without-supports</guid><description>Yes: up to 45° by most design guides (Prusa says 45 to 60°) and across bridges of 5 to 10 mm. Past that, use chamfers, teardrop holes, splits or a new orientation.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>overhangs</category></item><item><title>Why is my print rough under the supports?</title><link>https://asked3d.com/answers/print-rough-under-supports</link><guid isPermaLink="true">https://asked3d.com/answers/print-rough-under-supports</guid><description>The underside is printed across a gap onto support interface lines and sags between them. Denser interface layers and a gap under the shipped 0.2 mm smooth it.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>How do you print with PVA soluble supports?</title><link>https://asked3d.com/answers/pva-soluble-supports</link><guid isPermaLink="true">https://asked3d.com/answers/pva-soluble-supports</guid><description>Load dry PVA as a second filament, make it the support filament and set top Z distance to 0. It dissolves in water in a few hours to overnight.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>pla</category></item><item><title>How do you reduce support material?</title><link>https://asked3d.com/answers/reduce-support-material</link><guid isPermaLink="true">https://asked3d.com/answers/reduce-support-material</guid><description>Lay the part on its largest flat face, then switch to tree supports: 1.87 g against 3.9 g for normal supports in one published Bambu Studio slice.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>Which support interface material works with each filament?</title><link>https://asked3d.com/answers/support-interface-material</link><guid isPermaLink="true">https://asked3d.com/answers/support-interface-material</guid><description>Print only the interface in a material that won&apos;t bond: PETG under PLA, PLA under PETG, ABS or ASA under nylon. Makers then allow a 0 mm top Z distance.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>pla</category><category>petg</category></item><item><title>What does support on build plate only mean?</title><link>https://asked3d.com/answers/support-on-build-plate-only</link><guid isPermaLink="true">https://asked3d.com/answers/support-on-build-plate-only</guid><description>Supports may start only on the build plate, never on the model, so an overhang above another part of the print gets none. Every major slicer ships it off.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>What should support Z distance be?</title><link>https://asked3d.com/answers/support-z-distance</link><guid isPermaLink="true">https://asked3d.com/answers/support-z-distance</guid><description>0.2 mm top and bottom at 0.2 mm layers, as Bambu Studio, OrcaSlicer and PrusaSlicer ship it; finer profiles go lower. Use 0 only with soluble or support filament.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>Why do my supports keep falling over?</title><link>https://asked3d.com/answers/supports-keep-falling-over</link><guid isPermaLink="true">https://asked3d.com/answers/supports-keep-falling-over</guid><description>Tall, thin supports on a small foot get knocked loose. Widen the first layer (OrcaSlicer 2 mm, PrusaSlicer 3 mm by default), thicken branches, turn on Z hop.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category><category>bed-adhesion</category></item><item><title>Can you use tree supports with TPU?</title><link>https://asked3d.com/answers/tpu-supports</link><guid isPermaLink="true">https://asked3d.com/answers/tpu-supports</guid><description>Yes, but supports printed in TPU tend to string, collapse and stick. Bambu Lab advises PLA supports at a 0 mm top Z gap; for TPU on TPU, Prusa widens it to 0.3 mm.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>tpu</category></item><item><title>What is the difference between tree and normal supports?</title><link>https://asked3d.com/answers/tree-vs-normal-supports</link><guid isPermaLink="true">https://asked3d.com/answers/tree-vs-normal-supports</guid><description>Normal supports fill the space under an overhang with straight columns; tree supports branch from a trunk and touch it at 0.8 mm tips, using less filament.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>What are supports in 3D printing?</title><link>https://asked3d.com/answers/what-are-supports-in-3d-printing</link><guid isPermaLink="true">https://asked3d.com/answers/what-are-supports-in-3d-printing</guid><description>Temporary structures the slicer builds under steep overhangs, long bridges and mid-air islands. Off by default; Bambu Studio supports surfaces under 30° from horizontal.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>overhangs</category></item><item><title>What is support interface in 3D printing?</title><link>https://asked3d.com/answers/what-is-support-interface</link><guid isPermaLink="true">https://asked3d.com/answers/what-is-support-interface</guid><description>The dense layers between a support and the part. Bambu Studio ships 2 top and 2 bottom interface layers, PrusaSlicer 3 top; Cura&apos;s base profile leaves it off.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>Why are my supports so hard to remove?</title><link>https://asked3d.com/answers/why-are-supports-hard-to-remove</link><guid isPermaLink="true">https://asked3d.com/answers/why-are-supports-hard-to-remove</guid><description>The support&apos;s top is too close to the part or too solid. Profiles ship a 0.2 mm Top Z distance; Bambu Lab says 0 makes same-filament supports really hard to remove.</description><pubDate>Sat, 07 Nov 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>supports</category><category>slicer-settings</category></item><item><title>What retraction settings should you use for ABS and ASA?</title><link>https://asked3d.com/answers/abs-retraction-settings</link><guid isPermaLink="true">https://asked3d.com/answers/abs-retraction-settings</guid><description>Your printer&apos;s own: shipped ABS and ASA profiles use 0.7 to 0.8 mm on direct-drive Prusa and Bambu printers (0.4 mm for Bambu ABS) and 2.5 to 6.5 mm on Bowden.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>abs</category><category>asa</category><category>slicer-settings</category></item><item><title>How do you calibrate retraction distance?</title><link>https://asked3d.com/answers/calibrate-retraction-distance</link><guid isPermaLink="true">https://asked3d.com/answers/calibrate-retraction-distance</guid><description>Print a retraction tower (OrcaSlicer tests 0 to 2 mm in 0.1 mm steps, a new length every 1 mm of height) and keep the shortest length whose band prints clean.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>stringing</category><category>slicer-settings</category></item><item><title>Can Z hop cause stringing?</title><link>https://asked3d.com/answers/does-z-hop-cause-stringing</link><guid isPermaLink="true">https://asked3d.com/answers/does-z-hop-cause-stringing</guid><description>Yes. Prusa says a lower Lift Z improves stringing. Keep the hop low (Bambu Studio ships 0.4 mm) and lift on a slope, spiral or ramp instead of straight up.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>stringing</category><category>retraction</category><category>slicer-settings</category></item><item><title>What retraction settings should you use on an Ender 3?</title><link>https://asked3d.com/answers/ender-3-retraction-settings</link><guid isPermaLink="true">https://asked3d.com/answers/ender-3-retraction-settings</guid><description>Bowden Ender-3, Pro and V2: 4 to 6.5 mm (Cura gives the Ender-3 and V2 5 mm at 45 mm/s). Direct-drive S1, S1 Pro, V3 SE and V3 KE: 0.5 to 1.2 mm.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>What retraction settings should you use for PETG?</title><link>https://asked3d.com/answers/petg-retraction-settings</link><guid isPermaLink="true">https://asked3d.com/answers/petg-retraction-settings</guid><description>Shipped PETG profiles retract 0.4 to 1 mm at 30 to 45 mm/s on direct-drive printers and 2.5 to 8 mm on Bowden printers, close to each printer&apos;s PLA values.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>petg</category><category>slicer-settings</category></item><item><title>What retraction settings should you use for PLA?</title><link>https://asked3d.com/answers/pla-retraction-settings</link><guid isPermaLink="true">https://asked3d.com/answers/pla-retraction-settings</guid><description>Shipped PLA profiles retract 0.4 to 0.8 mm at 30 to 50 mm/s on direct-drive printers and 2.5 to 6.5 mm at 45 to 70 mm/s on Bowden printers.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>pla</category><category>slicer-settings</category></item><item><title>How do you remove stringing from a 3D print?</title><link>https://asked3d.com/answers/remove-stringing-from-3d-print</link><guid isPermaLink="true">https://asked3d.com/answers/remove-stringing-from-3d-print</guid><description>Pull or cut the loose strings, then hit the fine wisps with a heat gun at about 200 °C for one or two seconds. Longer can deform PLA, which softens at 54 to 60 °C.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>stringing</category><category>pla</category><category>petg</category></item><item><title>What should retraction distance be?</title><link>https://asked3d.com/answers/retraction-distance</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-distance</guid><description>Direct drive: 0.7 to 0.8 mm, as Bambu Lab, Prusa and Creality profiles ship. Bowden: 2.5 to 6.5 mm (Prusa MINI 2.5 to 3.2 mm, UltiMaker S5 6.5 mm).</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>What happens if retraction distance is too high?</title><link>https://asked3d.com/answers/retraction-distance-too-high</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-distance-too-high</guid><description>Soft filament is pulled up into the heatbreak and jams, the gear grinds it, and lines restart with gaps. Bambu Lab and Prusa&apos;s MK3S cap it at 2 mm.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>hotends</category><category>slicer-settings</category></item><item><title>What is retraction distance when cut?</title><link>https://asked3d.com/answers/retraction-distance-when-cut</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-distance-when-cut</guid><description>How far Bambu Studio and OrcaSlicer pull filament back before the cutter cuts it at a filament change: 18 mm by default, and the field only accepts 10 to 18 mm.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>Where are the retraction settings in Bambu Studio?</title><link>https://asked3d.com/answers/retraction-settings-bambu-studio</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-settings-bambu-studio</guid><description>Printer settings &gt; Extruder &gt; Retraction: Bambu Lab profiles ship 0.8 mm length and 0.4 mm Z hop. Per filament: Filament settings &gt; Setting Overrides, which wins.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>Where are the retraction settings in Cura?</title><link>https://asked3d.com/answers/retraction-settings-cura</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-settings-cura</guid><description>Print settings panel, Show Custom, Travel category. Most fields are hidden: search &quot;retract&quot;. Cura&apos;s base Retraction Distance is 6.5 mm at 25 mm/s.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>What should retraction speed be?</title><link>https://asked3d.com/answers/retraction-speed</link><guid isPermaLink="true">https://asked3d.com/answers/retraction-speed</guid><description>Use your profile&apos;s value: 30 mm/s on Bambu Lab printers, 35 to 45 mm/s on Prusa&apos;s direct-drive printers, 70 mm/s on the Bowden Prusa MINI, 25 mm/s in Cura.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>What retraction settings should you use for TPU?</title><link>https://asked3d.com/answers/tpu-retraction-settings</link><guid isPermaLink="true">https://asked3d.com/answers/tpu-retraction-settings</guid><description>Start from your slicer&apos;s TPU profile: 0.4 mm on Bambu Lab X1 Carbon, P1S and A1, 2.5 mm on Prusa MK4S and CORE One, off on the MK3S, 3 to 8 mm on Bowden printers.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>tpu</category><category>slicer-settings</category></item><item><title>What is retraction in 3D printing?</title><link>https://asked3d.com/answers/what-is-retraction</link><guid isPermaLink="true">https://asked3d.com/answers/what-is-retraction</guid><description>Pulling filament back before a travel move so the nozzle stops oozing: 0.8 mm at 30 mm/s in Bambu Studio&apos;s X1 Carbon profile, 3.2 mm at 70 mm/s on a Bowden Prusa MINI.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>stringing</category><category>slicer-settings</category></item><item><title>What is Z hop in 3D printing?</title><link>https://asked3d.com/answers/what-is-z-hop</link><guid isPermaLink="true">https://asked3d.com/answers/what-is-z-hop</guid><description>Z hop lifts the nozzle after a retraction so travel moves clear the print. Bambu Studio ships it on at 0.4 mm; UltiMaker Cura ships it off, set to 1 mm.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>Why is my 3D print stringing?</title><link>https://asked3d.com/answers/why-is-my-3d-print-stringing</link><guid isPermaLink="true">https://asked3d.com/answers/why-is-my-3d-print-stringing</guid><description>Stringing is plastic leaking from the nozzle on travel moves. Check a wet spool first, then heat (UltiMaker: 5 °C lower per print), retraction and long travels.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>stringing</category><category>retraction</category><category>slicer-settings</category></item><item><title>Why is PETG so stringy?</title><link>https://asked3d.com/answers/why-is-petg-so-stringy</link><guid isPermaLink="true">https://asked3d.com/answers/why-is-petg-so-stringy</guid><description>Shipped profiles run PETG 20 to 35 °C hotter than PLA, and its melt draws out into threads. Dry it, drop the nozzle 5 to 10 °C, and expect a few fine hairs.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>stringing</category><category>petg</category><category>retraction</category></item><item><title>What should Z hop height be?</title><link>https://asked3d.com/answers/z-hop-height</link><guid isPermaLink="true">https://asked3d.com/answers/z-hop-height</guid><description>0.2 to 0.4 mm on a 0.4 mm nozzle. Bambu Studio and OrcaSlicer ship 0.4 mm, PrusaSlicer 0.4 mm on the Prusa MK3S and 0.2 mm on the MINI, Cura&apos;s Creality profiles 0.2 mm.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>Which Z hop type should you use?</title><link>https://asked3d.com/answers/z-hop-type</link><guid isPermaLink="true">https://asked3d.com/answers/z-hop-type</guid><description>Keep your profile&apos;s type: Bambu Lab printer profiles ship Auto, which picks Slope or Spiral per travel. OrcaSlicer&apos;s own default is Slope at a 3° Traveling angle.</description><pubDate>Fri, 30 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>retraction</category><category>slicer-settings</category></item><item><title>Can you 3D print a garden hose adapter?</title><link>https://asked3d.com/answers/3d-printed-garden-hose-adapter</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-garden-hose-adapter</guid><description>Yes. Copy the 3/4-11.5 NH garden hose thread, not 3/4 in NPT, let a rubber washer seal a flat face, and print PETG or ASA upright with four or more walls.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>threads-and-fasteners</category><category>petg</category></item><item><title>Can you 3D print an oil seal?</title><link>https://asked3d.com/answers/3d-printed-oil-seal</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-oil-seal</guid><description>Only as a stopgap on a slow shaft. A molded nitrile oil seal is rated to 80 °C and 10 m/s; NinjaFlex TPU deflects at 60 °C. Never print a hydraulic seal.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>replacement-parts</category></item><item><title>Can 3D printers print rubber?</title><link>https://asked3d.com/answers/can-3d-printers-print-rubber</link><guid isPermaLink="true">https://asked3d.com/answers/can-3d-printers-print-rubber</guid><description>Not vulcanized rubber, which never melts. Filament printers print rubber-like TPU and TPE in 60A to 95A Shore grades, spanning Parker&apos;s 70A to 80A O-ring range.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category></item><item><title>Do 3D prints dissolve in water?</title><link>https://asked3d.com/answers/do-3d-prints-dissolve-in-water</link><guid isPermaLink="true">https://asked3d.com/answers/do-3d-prints-dissolve-in-water</guid><description>No. Data sheets list PLA, PETG, ABS, ASA, nylon and TPU as insoluble in water. Only PVA and BVOH support filaments dissolve, in a few hours to overnight.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>waterproofing</category></item><item><title>Do 3D prints float in water?</title><link>https://asked3d.com/answers/do-3d-prints-float</link><guid isPermaLink="true">https://asked3d.com/answers/do-3d-prints-float</guid><description>A closed print with sparse infill usually floats. Solid PLA (1.24 g/cm³), PETG, ABS and nylon sink in water (1.00 g/cm³); polypropylene (0.9 g/cm³) floats.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>pla</category><category>petg</category></item><item><title>How to seal a 3D printed mold for casting</title><link>https://asked3d.com/answers/seal-3d-printed-mold</link><guid isPermaLink="true">https://asked3d.com/answers/seal-3d-printed-mold</guid><description>Brush a cured coat of XTC-3D epoxy over the cavity, then the release agent your casting maker names. Test platinum silicone on a sealed scrap: it can stay tacky.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>How to seal 3D prints for a reptile enclosure</title><link>https://asked3d.com/answers/seal-3d-prints-for-reptiles</link><guid isPermaLink="true">https://asked3d.com/answers/seal-3d-prints-for-reptiles</guid><description>Coat it in an epoxy its maker rates safe near reptiles and cure it fully. Bearded dragons bask at up to 42 °C (108 °F) and PLA softens at 57 °C: use PETG or ASA there.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>pla</category><category>petg</category><category>asa</category></item><item><title>Can you seal a 3D print with resin?</title><link>https://asked3d.com/answers/seal-3d-prints-with-resin</link><guid isPermaLink="true">https://asked3d.com/answers/seal-3d-prints-with-resin</guid><description>UV printer resin brushed on hardens only where 405 nm light or sunlight lands, and no maker documents it as a sealant. Uncured, it carries H317 (skin allergy).</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>pla</category><category>petg</category></item><item><title>Can you seal 3D prints with silicone?</title><link>https://asked3d.com/answers/seal-3d-prints-with-silicone</link><guid isPermaLink="true">https://asked3d.com/answers/seal-3d-prints-with-silicone</guid><description>Yes for seams and joints, not as a coat: silicone sealant is not paintable, goes on at least 1/8 in (3.2 mm) thick and is water ready in 30 minutes to 12 hours.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>watertight</category><category>pla</category><category>petg</category></item><item><title>How to seal a painted 3D print</title><link>https://asked3d.com/answers/seal-painted-3d-prints</link><guid isPermaLink="true">https://asked3d.com/answers/seal-painted-3d-prints</guid><description>Let the paint dry (72 hours to two weeks for Liquitex acrylics), then brush or spray two or three thin clear coats. Keep to each maker&apos;s recoat time.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>How to waterproof a 3D printed boat</title><link>https://asked3d.com/answers/waterproof-3d-printed-boat</link><guid isPermaLink="true">https://asked3d.com/answers/waterproof-3d-printed-boat</guid><description>Print the hull with 4 perimeters (2 in ASA), brush epoxy inside and out, grease the stuffing tube, seal the rudder and hatch, then float-test it overnight.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>watertight</category><category>petg</category><category>asa</category></item><item><title>What does watertight mean in 3D printing?</title><link>https://asked3d.com/answers/what-does-watertight-mean-3d-printing</link><guid isPermaLink="true">https://asked3d.com/answers/what-does-watertight-mean-3d-printing</guid><description>Watertight means a closed mesh: no holes, every edge shared by exactly two faces and every face pointing outward, so the slicer can tell inside from outside.</description><pubDate>Wed, 28 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>slicer-settings</category></item><item><title>Should you use a cooling fan for ABS?</title><link>https://asked3d.com/answers/abs-cooling-fan-speed</link><guid isPermaLink="true">https://asked3d.com/answers/abs-cooling-fan-speed</guid><description>Mostly no. Run ABS with the part fan off or low: PrusaSlicer&apos;s Generic ABS keeps it off, Bambu ABS runs 10%, and both raise it for bridges and fast layers.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-cooling</category><category>abs</category><category>asa</category><category>warping</category></item><item><title>Why do corners bulge on my prints?</title><link>https://asked3d.com/answers/corners-bulge-on-prints</link><guid isPermaLink="true">https://asked3d.com/answers/corners-bulge-on-prints</guid><description>Pressure left in the nozzle keeps pushing plastic out as the head slows for the corner. Tune pressure advance: Klipper ships it at 0 and Marlin with it disabled.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>slicer-settings</category><category>firmware</category></item><item><title>Why do overhangs droop in 3D printing?</title><link>https://asked3d.com/answers/overhangs-drooping</link><guid isPermaLink="true">https://asked3d.com/answers/overhangs-drooping</guid><description>Each overhang layer rests partly on air; past about 45° from vertical, soft plastic sags before it cools. Fix: full fan, slower overhangs, a cooler nozzle.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>overhangs</category><category>part-cooling</category><category>slicer-settings</category></item><item><title>How much cooling does PETG need?</title><link>https://asked3d.com/answers/petg-cooling-fan-speed</link><guid isPermaLink="true">https://asked3d.com/answers/petg-cooling-fan-speed</guid><description>A moderate fan, about 20 to 60%, not PLA&apos;s 100%. Prusa&apos;s PETG profile runs 30 to 50%, Bambu&apos;s 20 to 40%; both keep it off for 3 layers, more for bridges.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>part-cooling</category><category>slicer-settings</category></item><item><title>What fan speed should you use for PLA?</title><link>https://asked3d.com/answers/pla-cooling-fan-speed</link><guid isPermaLink="true">https://asked3d.com/answers/pla-cooling-fan-speed</guid><description>Run PLA&apos;s part cooling fan at 100%, off on the first layer for bed adhesion. Prusament&apos;s data sheet says 100%; some printer profiles start at 50 to 85% and ramp up.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-cooling</category><category>pla</category><category>slicer-settings</category></item><item><title>Where is pressure advance in Bambu Studio?</title><link>https://asked3d.com/answers/pressure-advance-in-bambu-studio</link><guid isPermaLink="true">https://asked3d.com/answers/pressure-advance-in-bambu-studio</guid><description>Bambu Studio calls it flow dynamics: Calibration tab &gt; Flow Dynamics saves a K value on the printer. The 0.02 field in filament settings is for third-party printers.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>slicer-settings</category></item><item><title>What is pressure advance smooth time?</title><link>https://asked3d.com/answers/pressure-advance-smooth-time</link><guid isPermaLink="true">https://asked3d.com/answers/pressure-advance-smooth-time</guid><description>A Klipper [extruder] setting: the window, in seconds, over which pressure advance is averaged. Default 0.040 s, maximum 0.200 s; larger is smoother but blurs corners.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>firmware</category></item><item><title>How do you know if pressure advance is too high?</title><link>https://asked3d.com/answers/pressure-advance-too-high</link><guid isPermaLink="true">https://asked3d.com/answers/pressure-advance-too-high</guid><description>Rounded corners, lines that thin into a corner and gaps between perimeters mean pressure advance is too high: lower it. Over 0.200, Klipper&apos;s extruder may skip.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>firmware</category><category>slicer-settings</category></item><item><title>What is a good pressure advance value for PLA?</title><link>https://asked3d.com/answers/pressure-advance-value-for-pla</link><guid isPermaLink="true">https://asked3d.com/answers/pressure-advance-value-for-pla</guid><description>Shipped PLA profiles use 0.02 to 0.05 on direct-drive printers with a 0.4 mm nozzle (0.036 on a Prusa Core One) and 0.2 to 0.27 on a Bowden Prusa MINI.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>pla</category><category>slicer-settings</category></item><item><title>Can you 3D print without a cooling fan?</title><link>https://asked3d.com/answers/printing-without-cooling-fan</link><guid isPermaLink="true">https://asked3d.com/answers/printing-without-cooling-fan</guid><description>Yes for ABS, ASA, PC and nylon: profiles run the part fan off or at 10 to 20% on long layers. PLA needs it for bridges and overhangs. Never turn off the hotend fan.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-cooling</category><category>slicer-settings</category><category>abs</category></item><item><title>How do you read a pressure advance test?</title><link>https://asked3d.com/answers/read-pressure-advance-test</link><guid isPermaLink="true">https://asked3d.com/answers/read-pressure-advance-test</guid><description>Pick the band, line or corner that prints most evenly. On a tower, value = start + height x step: OrcaSlicer&apos;s example is 0 + 8 mm x 0.002 = 0.016.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>slicer-settings</category><category>firmware</category></item><item><title>Why are my small prints melting and blobby?</title><link>https://asked3d.com/answers/small-prints-melting-blobby</link><guid isPermaLink="true">https://asked3d.com/answers/small-prints-melting-blobby</guid><description>Small layers print in seconds, so the next lands before the last one cools. Set a minimum layer time (4 to 12 s in stock PLA profiles) and keep the fan at max.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-cooling</category><category>slicer-settings</category><category>pla</category></item><item><title>What does linear advance do?</title><link>https://asked3d.com/answers/what-does-linear-advance-do</link><guid isPermaLink="true">https://asked3d.com/answers/what-does-linear-advance-do</guid><description>It runs the extruder ahead as the head speeds up, so lines keep full width. K sets how much: about 0.1 to 2.0 in Marlin, set with M900 K; M900 K0 turns it off.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>firmware</category></item><item><title>What does the part cooling fan do?</title><link>https://asked3d.com/answers/what-does-part-cooling-fan-do</link><guid isPermaLink="true">https://asked3d.com/answers/what-does-part-cooling-fan-do</guid><description>It cools plastic leaving the nozzle so it sets before the next line lands, making bridges, overhangs and fine tips work. Base PLA profiles run it at 100% after layer 1.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-cooling</category><category>hotends</category><category>slicer-settings</category></item><item><title>What is pressure advance in 3D printing?</title><link>https://asked3d.com/answers/what-is-pressure-advance</link><guid isPermaLink="true">https://asked3d.com/answers/what-is-pressure-advance</guid><description>A firmware setting that pushes extra filament in as the head speeds up and pulls it back as it slows. Klipper ships it at 0 (off); typical values are 0.050 to 1.000.</description><pubDate>Sat, 24 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pressure-advance</category><category>firmware</category><category>slicer-settings</category></item><item><title>Why is my 3D printer leaking filament around the nozzle?</title><link>https://asked3d.com/answers/3d-printer-leaking-filament</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printer-leaking-filament</guid><description>The nozzle is not sealed against the heatbreak. Reseat it, then tighten it hot: E3D says 285 °C and 2 Nm for a brass V6 nozzle, Prusa 280 °C and 2.5 Nm on the MK3S.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>hotends</category></item><item><title>What does an HMS error mean on a Bambu Lab printer?</title><link>https://asked3d.com/answers/bambu-hms-error</link><guid isPermaLink="true">https://asked3d.com/answers/bambu-hms-error</guid><description>An HMS error is a Health Management System alert. Its 16-character code names the module that raised it and the severity, and its wiki page gives the fix.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category></item><item><title>Why does my 3D printer say heating failed bed?</title><link>https://asked3d.com/answers/heating-failed-bed</link><guid isPermaLink="true">https://asked3d.com/answers/heating-failed-bed</guid><description>Marlin halts if the bed gains less than 2 °C in 60 s after a heat command. Check the bed&apos;s power terminals and solder joints first, then the board output and supply.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category></item><item><title>What does the heating failed error mean on a 3D printer?</title><link>https://asked3d.com/answers/heating-failed-printer-halted</link><guid isPermaLink="true">https://asked3d.com/answers/heating-failed-printer-halted</guid><description>The hotend warmed too slowly after a heat command, so the printer halted. Marlin 2.1.1 and later want 2 °C in 40 s. A damaged or loose heater cable is the usual cause.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category><category>hotends</category></item><item><title>What does a homing failed error mean on a 3D printer?</title><link>https://asked3d.com/answers/homing-failed-error</link><guid isPermaLink="true">https://asked3d.com/answers/homing-failed-error</guid><description>The axis never triggered its endstop or probe. Marlin and Klipper search 1.5 times the axis travel, then stop: check the switch, the probe and the mechanics.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category></item><item><title>Why does my Bambu printer say the hotend cooling fan speed is abnormal?</title><link>https://asked3d.com/answers/hotend-cooling-fan-speed-abnormal</link><guid isPermaLink="true">https://asked3d.com/answers/hotend-cooling-fan-speed-abnormal</guid><description>The hotend fan is too slow or stopped (HMS_0300-0300-0001-0001). Clear strings, reseat its 4-pin plug and retest at 51 °C: the fan runs above 50 °C.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>hotends</category></item><item><title>Why does Klipper say extrude below minimum temp?</title><link>https://asked3d.com/answers/klipper-extrude-below-minimum-temp</link><guid isPermaLink="true">https://asked3d.com/answers/klipper-extrude-below-minimum-temp</guid><description>Klipper blocks every extruder move while the hotend reads below min_extrude_temp, 170 °C by default. Usually a macro extruded before M109 finished heating.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category><category>hotends</category></item><item><title>What does an MCU timeout mean in Klipper?</title><link>https://asked3d.com/answers/klipper-mcu-timeout</link><guid isPermaLink="true">https://asked3d.com/answers/klipper-mcu-timeout</guid><description>Klipper&apos;s host stopped hearing a board: a 5th unanswered clock query, sent every 0.98 s, trips it. Check the USB cable, power and noise, then FIRMWARE_RESTART.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category></item><item><title>What is a MINTEMP error, and is it dangerous?</title><link>https://asked3d.com/answers/mintemp-error</link><guid isPermaLink="true">https://asked3d.com/answers/mintemp-error</guid><description>MINTEMP is a safety shutdown: Marlin trips below 5 °C, usually from an unplugged or broken thermistor wire. What to check, including a Prusa MK4 after a nozzle swap.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>hotends</category><category>firmware</category></item><item><title>What causes a thermal runaway error on a 3D printer?</title><link>https://asked3d.com/answers/thermal-runaway-error</link><guid isPermaLink="true">https://asked3d.com/answers/thermal-runaway-error</guid><description>A heater stayed below target too long (Marlin: 4 °C for 40 s). Usual causes: a loose thermistor, heater or wiring fault, fan on the block or untuned PID.</description><pubDate>Tue, 20 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>error-codes</category><category>firmware</category><category>hotends</category></item><item><title>What temperature and how long should you dry ABS and ASA?</title><link>https://asked3d.com/answers/abs-asa-drying-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/abs-asa-drying-temperature</guid><description>Dry ABS and ASA at 80 °C (176 °F): 8 hours on Bambu Lab&apos;s data sheets, 4 hours for Prusament ASA. Polymaker uses 70 °C for 6 to 7 hours.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>abs</category><category>asa</category></item><item><title>Can you dry filament for too long?</title><link>https://asked3d.com/answers/can-you-over-dry-filament</link><guid isPermaLink="true">https://asked3d.com/answers/can-you-over-dry-filament</guid><description>Mostly no: at the maker&apos;s temperature, no maker names harm from extra hours for PLA or PETG. Heat above it fuses coils; nylon and PC can turn brittle.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>Do you need to dry PETG?</title><link>https://asked3d.com/answers/do-you-need-to-dry-petg</link><guid isPermaLink="true">https://asked3d.com/answers/do-you-need-to-dry-petg</guid><description>Usually not from an intact vacuum bag. Dry PETG once an opened spool has sat out or pops: Bambu Lab&apos;s line is 72 hours in air above 50% RH.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category></item><item><title>Do you need to dry PLA?</title><link>https://asked3d.com/answers/do-you-need-to-dry-pla</link><guid isPermaLink="true">https://asked3d.com/answers/do-you-need-to-dry-pla</guid><description>Not from a sealed bag. Dry PLA once an opened spool has sat in room air or it pops and strings: Bambu Lab says 55% RH air re-wets filament in 2 to 12 hours.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category></item><item><title>Does the Bambu Lab AMS dry filament?</title><link>https://asked3d.com/answers/does-ams-dry-filament</link><guid isPermaLink="true">https://asked3d.com/answers/does-ams-dry-filament</guid><description>Only the Bambu Lab AMS 2 Pro (up to 65 °C) and AMS HT (up to 85 °C) dry filament. The original AMS and AMS lite don&apos;t heat. AMS 2 Pro PETG preset: 65 °C, 12 h.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>tpu</category></item><item><title>Can you dry filament in a food dehydrator?</title><link>https://asked3d.com/answers/dry-filament-in-food-dehydrator</link><guid isPermaLink="true">https://asked3d.com/answers/dry-filament-in-food-dehydrator</guid><description>Yes for PLA, PETG and TPU: Nesco, COSORI and Presto dehydrators reach 71 to 74 °C. Not for nylon or PC, which need 75 to 90 °C. Lift the trays out to fit the spool.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>Can you dry filament in the oven?</title><link>https://asked3d.com/answers/dry-filament-in-oven</link><guid isPermaLink="true">https://asked3d.com/answers/dry-filament-in-oven</guid><description>Only if the oven holds the drying temperature. GE&apos;s Warm mode bakes at 170 °F (77 °C), past PLA&apos;s 60 °C glass transition. Bambu Lab says no; Prusa allows one.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>Can you dry filament while printing?</title><link>https://asked3d.com/answers/dry-filament-while-printing</link><guid isPermaLink="true">https://asked3d.com/answers/dry-filament-while-printing</guid><description>Yes, on dryers built for it. Bambu Lab&apos;s AMS 2 Pro and AMS HT drop to 45 °C with PLA and 55 °C with PETG once a print starts; standalone dryers hold their setting.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>nylon</category><category>tpu</category></item><item><title>Can you dry PLA and PETG at the same time?</title><link>https://asked3d.com/answers/dry-pla-and-petg-together</link><guid isPermaLink="true">https://asked3d.com/answers/dry-pla-and-petg-together</guid><description>Yes, at the PLA&apos;s setting only. Makers dry PLA at 45 to 55 °C and PETG at 55 to 65 °C, so the ranges meet only at 55 °C, Prusa&apos;s 6-hour PETG setting.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>What are the drying temperatures and times for each filament?</title><link>https://asked3d.com/answers/filament-drying-temperature-chart</link><guid isPermaLink="true">https://asked3d.com/answers/filament-drying-temperature-chart</guid><description>Dry PLA at 45 to 55 °C, PETG at 55 to 65 °C, TPU at 60 to 70 °C and nylon at 75 to 100 °C, for 4 to 12 hours, per Bambu Lab, Prusa and Polymaker.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category><category>tpu</category></item><item><title>Why is my filament still stringing after drying?</title><link>https://asked3d.com/answers/filament-still-stringing-after-drying</link><guid isPermaLink="true">https://asked3d.com/answers/filament-still-stringing-after-drying</guid><description>Once the spool is dry, stringing comes from settings: Prusa says lower the nozzle 5 to 10 °C, Bambu Lab adds retraction up to 2 mm and shorter travel.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>pla</category><category>slicer-settings</category></item><item><title>Which filaments absorb the most moisture?</title><link>https://asked3d.com/answers/filaments-that-absorb-moisture</link><guid isPermaLink="true">https://asked3d.com/answers/filaments-that-absorb-moisture</guid><description>PVA and PA6 nylon absorb the most: 6.25% and 2.35 to 2.56% at saturation on Bambu Lab&apos;s data sheets, against 0.43% for PLA and 0.25% for PC.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>nylon</category><category>polycarbonate</category><category>tpu</category><category>pla</category></item><item><title>How do you dry filament?</title><link>https://asked3d.com/answers/how-to-dry-filament</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-dry-filament</guid><description>Heat the spool below its softening point, then seal it with desiccant. Bambu Lab&apos;s oven setting is 50 °C for PLA and 60 to 65 °C for PETG, for 8 hours.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>How can you tell if filament is wet?</title><link>https://asked3d.com/answers/how-to-tell-if-filament-is-wet</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-tell-if-filament-is-wet</guid><description>Wet filament pops or hisses at the nozzle, bubbles, strings and prints rough. To confirm, dry it (PLA 50 °C, PETG 60 to 65 °C, 8 hours) and reprint.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>What temperature and how long should you dry nylon filament?</title><link>https://asked3d.com/answers/nylon-drying-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/nylon-drying-temperature</guid><description>Most nylon sheets say 6 to 12 hours at 80 to 100 °C: Bambu Lab PA6-CF 80 °C for 8 to 12 h, Polymaker Fiberon 100 °C for 10 h, Prusament PA11 CF 90 °C for 6 h.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>nylon</category></item><item><title>What temperature and how long should you dry PETG?</title><link>https://asked3d.com/answers/petg-drying-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/petg-drying-temperature</guid><description>Dry PETG at 55 to 65 °C (131 to 149 °F) for 6 to 8 hours. Prusa sets 55 °C, Bambu Lab 65 °C, Polymaker 60 to 65 °C. None of them goes above 65 °C.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category></item><item><title>What temperature and how long should you dry PLA?</title><link>https://asked3d.com/answers/pla-drying-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/pla-drying-temperature</guid><description>Dry PLA at 45 to 55 °C (113 to 131 °F) for 6 to 8 hours. Bambu Lab sets 50 °C for 8 hours, Polymaker 55 °C for 6, Prusa 45 °C for 6. Silk and PLA-CF take 55 °C.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category></item><item><title>How should you store filament to keep it dry?</title><link>https://asked3d.com/answers/store-filament-dry</link><guid isPermaLink="true">https://asked3d.com/answers/store-filament-dry</guid><description>Seal it in an airtight bag or box with desiccant below 20% RH, Bambu Lab&apos;s target for PLA, PETG, TPU, PC and nylon. Room air can re-wet it in 2 to 12 hours.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>What temperature and how long should you dry TPU?</title><link>https://asked3d.com/answers/tpu-drying-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/tpu-drying-temperature</guid><description>Dry TPU at 70 °C for 8 hours, per Bambu Lab and Polymaker data sheets. Prusa dries Prusament TPU 95A at 60 °C for 4 hours. Bambu&apos;s TPU spools take 90 °C.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category></item><item><title>Does wet filament make prints weaker?</title><link>https://asked3d.com/answers/wet-filament-weaker-prints</link><guid isPermaLink="true">https://asked3d.com/answers/wet-filament-weaker-prints</guid><description>Yes: printing from wet filament cost polycarbonate up to 30% of its strength along the lines and 70% across them, ABS 25% and PA6 nylon 43%. PLA held a week at 65% RH.</description><pubDate>Sat, 17 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-strength</category><category>nylon</category><category>pla</category></item><item><title>What bed temperature should you use for ABS?</title><link>https://asked3d.com/answers/abs-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/abs-bed-temperature</guid><description>Use 90 to 100 °C for ABS: Bambu Lab&apos;s range on PEI and Engineering plates. Prusa defaults to 100 °C, and the Bambu Lab P1S bed tops out at 100 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>abs</category><category>bed-adhesion</category><category>build-plates</category><category>warping</category></item><item><title>What bed temperature should you use for ASA?</title><link>https://asked3d.com/answers/asa-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/asa-bed-temperature</guid><description>Set the bed to 100 °C for ASA, Bambu Studio&apos;s default. Data sheets run from 75 °C (Polymaker) to 110 °C (Prusa), always with glue and an enclosure.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>asa</category><category>bed-adhesion</category><category>build-plates</category><category>warping</category></item><item><title>How do you do a cold pull on a Bambu Lab printer?</title><link>https://asked3d.com/answers/bambu-lab-cold-pull</link><guid isPermaLink="true">https://asked3d.com/answers/bambu-lab-cold-pull</guid><description>Bambu Lab&apos;s X1C and P1S guides load PLA at 220 to 230 °C and pull at 70 to 100 °C; the H2D, H2S and P2S run it from Toolbox &gt; Nozzle Cold Pull Maintenance.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>tpu</category></item><item><title>Is the bed surface as hot as the temperature you set?</title><link>https://asked3d.com/answers/bed-surface-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/bed-surface-temperature</guid><description>Usually not. Prusa puts its steel sheet about 5 to 10 °C below the heatbed sensor, and a thermal camera read 56 °C on a Prusa i3 MK3 bed set to 60 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>build-plates</category><category>bed-adhesion</category><category>slicer-settings</category></item><item><title>Does a higher bed temperature help adhesion?</title><link>https://asked3d.com/answers/bed-temperature-adhesion</link><guid isPermaLink="true">https://asked3d.com/answers/bed-temperature-adhesion</guid><description>Yes, up to a point: Prusa adds 5 to 10 °C when a material won&apos;t stick, but makers stop near the glass transition, 61 °C for PLA and 81 °C for PETG.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>bed-adhesion</category><category>pla</category><category>petg</category><category>build-plates</category></item><item><title>Bed temperature chart: what bed temperature does each filament need?</title><link>https://asked3d.com/answers/bed-temperature-chart</link><guid isPermaLink="true">https://asked3d.com/answers/bed-temperature-chart</guid><description>Bambu Lab sets PLA at 45 to 65 °C on PEI, PETG 60 to 80 °C, ABS and ASA 90 to 100 °C, PC and nylon 100 to 120 °C. Fiber-filled grades match their base plastic.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>build-plates</category><category>bed-adhesion</category><category>slicer-settings</category><category>warping</category></item><item><title>What bed temperature makes a print easiest to remove?</title><link>https://asked3d.com/answers/bed-temperature-to-remove-print</link><guid isPermaLink="true">https://asked3d.com/answers/bed-temperature-to-remove-print</guid><description>Let it cool: Prusa waits for room temperature and Bambu Lab for 35 °C or lower on textured PEI. On Bambu&apos;s SuperTack plate, reheat a stuck print to about 50 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>bed-adhesion</category><category>build-plates</category><category>pla</category><category>petg</category></item><item><title>What happens if the bed temperature is too high?</title><link>https://asked3d.com/answers/bed-temperature-too-high</link><guid isPermaLink="true">https://asked3d.com/answers/bed-temperature-too-high</guid><description>The first layers stay soft and squash out into elephant foot; Polymaker caps PLA at 60 °C. Too hot also clogs nozzles and bonds PETG hard enough to tear PEI.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>bed-adhesion</category><category>build-plates</category></item><item><title>Does bed temperature affect warping?</title><link>https://asked3d.com/answers/bed-temperature-warping</link><guid isPermaLink="true">https://asked3d.com/answers/bed-temperature-warping</guid><description>Yes. In a 2021 ABS test, corner lift was lowest at a 90 °C bed, 0.89 mm, and grew both cooler and hotter: 1.65 mm at 80 °C, 1.37 mm at 100 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>warping</category><category>bed-adhesion</category><category>pla</category><category>petg</category></item><item><title>How do you change the bed temperature in Bambu Studio?</title><link>https://asked3d.com/answers/change-bed-temperature-in-slicer</link><guid isPermaLink="true">https://asked3d.com/answers/change-bed-temperature-in-slicer</guid><description>Bed temperature sits in the filament preset, one row per plate type. Bambu Studio&apos;s PLA Basic profile runs 55 °C on Textured PEI on X1 and P1S, 65 °C on the A1.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>slicer-settings</category><category>build-plates</category><category>pla</category></item><item><title>Is cleaning filament better than a cold pull?</title><link>https://asked3d.com/answers/cleaning-filament-vs-cold-pull</link><guid isPermaLink="true">https://asked3d.com/answers/cleaning-filament-vs-cold-pull</guid><description>Neither: they do different jobs. Cleaning filament such as eSUN eClean flushes old material at 160 to 300 °C; a cold pull drags debris out at 80 to 160 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>polycarbonate</category><category>nylon</category></item><item><title>How do you know if your 3D printer nozzle is clogged?</title><link>https://asked3d.com/answers/clogged-nozzle-symptoms</link><guid isPermaLink="true">https://asked3d.com/answers/clogged-nozzle-symptoms</guid><description>No filament comes out, lines print thin with gaps, the extruder clicks, or a purged strand curls back onto the nozzle. Prusa tests it at 260 °C for PLA.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>Why do you need a cold pull before printing TPU?</title><link>https://asked3d.com/answers/cold-pull-before-printing-tpu</link><guid isPermaLink="true">https://asked3d.com/answers/cold-pull-before-printing-tpu</guid><description>TPU is too soft to push old filament out of the nozzle. Bambu Lab says cold pull with PLA or PETG first: flush at 250 °C, pull PLA at 70 to 100 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>pla</category><category>petg</category></item><item><title>Which filament works best for a cold pull?</title><link>https://asked3d.com/answers/cold-pull-filament</link><guid isPermaLink="true">https://asked3d.com/answers/cold-pull-filament</guid><description>Prusa&apos;s tests found PLA works best for a cold pull, at 85 to 100 °C. Bambu Lab adds PETG for high-flow nozzles; Creality favors nylon at 140 to 160 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category></item><item><title>What temperature should you do a cold pull at?</title><link>https://asked3d.com/answers/cold-pull-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/cold-pull-temperature</guid><description>Pull PLA at 70 to 100 °C after heating to 200 to 270 °C. UltiMaker pulls ABS and cleaning filament at 140 to 160 °C; Creality gives 120 °C for PETG.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>abs</category><category>nylon</category></item><item><title>Does PLA need a heated bed?</title><link>https://asked3d.com/answers/does-pla-need-heated-bed</link><guid isPermaLink="true">https://asked3d.com/answers/does-pla-need-heated-bed</guid><description>No. Prusa says PLA does not require a heated bed, and Polymaker and Overture start their bed range at 25 °C. Prusa still recommends a 60 °C bed.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>bed-adhesion</category><category>build-plates</category><category>warping</category></item><item><title>What bed temperature dries filament?</title><link>https://asked3d.com/answers/dry-filament-on-heated-bed</link><guid isPermaLink="true">https://asked3d.com/answers/dry-filament-on-heated-bed</guid><description>Bambu Lab&apos;s heated-bed drying table sets 60 to 70 °C for PLA, 75 to 85 °C for PETG and 80 to 90 °C for TPU, for 12 hours, spool covered and printer closed.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>tpu</category><category>enclosures</category></item><item><title>Why does my extruder click but nothing comes out?</title><link>https://asked3d.com/answers/extruder-clicking-nothing-comes-out</link><guid isPermaLink="true">https://asked3d.com/answers/extruder-clicking-nothing-comes-out</guid><description>A blockage makes the motor skip steps. Check for a nozzle clog, then first layer height, heat creep, speed (8 to 12 mm³/s on an all-metal hotend) and the gears.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>slicer-settings</category></item><item><title>How do you remove filament stuck in the heatbreak?</title><link>https://asked3d.com/answers/filament-stuck-in-heatbreak</link><guid isPermaLink="true">https://asked3d.com/answers/filament-stuck-in-heatbreak</guid><description>Heat the hotend to 260 °C after PLA or 280 °C after PETG, push a 1.5 mm rigid wire down from the top, or pull the stub up hot with pliers.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>How do you find the right bed temperature for a filament?</title><link>https://asked3d.com/answers/find-right-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/find-right-bed-temperature</guid><description>Take the bed range from the data sheet&apos;s recommended print settings, for your plate (Prusament PLA: 40 to 60 °C). Raise 5 to 10 °C if the first layer won&apos;t stick.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>bed-adhesion</category><category>build-plates</category><category>slicer-settings</category></item><item><title>Should the first layer bed temperature be different from the rest?</title><link>https://asked3d.com/answers/first-layer-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/first-layer-bed-temperature</guid><description>Most slicer defaults use one bed temperature for all layers. PrusaSlicer starts PETG at 85 °C then 90 °C; OrcaSlicer starts ABS at 105 °C then 100 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>slicer-settings</category><category>bed-adhesion</category><category>petg</category><category>abs</category></item><item><title>How do you fix heat creep?</title><link>https://asked3d.com/answers/fix-heat-creep</link><guid isPermaLink="true">https://asked3d.com/answers/fix-heat-creep</guid><description>Clear the jam at 250 °C, cold pull from 220 to 100 °C, then cut the heat: hotend fan always on, door open for PLA on a 45 °C+ bed, retraction 2 mm or less.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>tpu</category><category>slicer-settings</category></item><item><title>Do hardened steel nozzles clog more than brass?</title><link>https://asked3d.com/answers/hardened-steel-nozzle-clogs</link><guid isPermaLink="true">https://asked3d.com/answers/hardened-steel-nozzle-clogs</guid><description>Not by itself. Hardened steel conducts heat about a fifth as well as brass, so Prusa adds about 5 °C and Slice Engineering 5 to 10 °C to keep the melt hot enough.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>slicer-settings</category></item><item><title>How hot can a 3D printer heated bed get?</title><link>https://asked3d.com/answers/heated-bed-max-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/heated-bed-max-temperature</guid><description>Consumer heated beds top out at 80 to 120 °C: Bambu A1 mini 80 °C, P1S 100 °C, X1C 110 °C, Ender-3 110 °C, and H2D, Prusa MK4S and CORE One+ 120 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>build-plates</category><category>abs</category><category>polycarbonate</category><category>nylon</category></item><item><title>How often should you clean a 3D printer nozzle?</title><link>https://asked3d.com/answers/how-often-clean-nozzle</link><guid isPermaLink="true">https://asked3d.com/answers/how-often-clean-nozzle</guid><description>Wipe the outside before each print and cold pull the inside about monthly, Bambu Lab&apos;s minimum. Prusa&apos;s INDX guide says 200 print hours; UltiMaker 100 to 400.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>tpu</category></item><item><title>How do you do a cold pull?</title><link>https://asked3d.com/answers/how-to-do-a-cold-pull</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-do-a-cold-pull</guid><description>Fill the nozzle at printing temperature, cool it to 70 to 100 °C for PLA or 140 to 160 °C for nylon, then pull up. A good tip is a cone with the nozzle&apos;s imprint.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>nylon</category></item><item><title>What is carbon buildup in a nozzle?</title><link>https://asked3d.com/answers/nozzle-carbon-buildup</link><guid isPermaLink="true">https://asked3d.com/answers/nozzle-carbon-buildup</guid><description>Burnt plastic from filament left in a hot nozzle. Marlin&apos;s optional idle timeout cuts the heater after 5 minutes; Prusa brushes the outside at 250 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>abs</category><category>polycarbonate</category><category>nylon</category></item><item><title>What size needle cleans a 0.4 mm nozzle?</title><link>https://asked3d.com/answers/nozzle-cleaning-needle-size</link><guid isPermaLink="true">https://asked3d.com/answers/nozzle-cleaning-needle-size</guid><description>A 0.3 to 0.35 mm needle, the size Prusa Research bundles, pushed 1 to 2 cm up from below with the nozzle hot. It must be thinner than the 0.4 mm bore.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>abs</category></item><item><title>Why does my 3D printer nozzle keep clogging?</title><link>https://asked3d.com/answers/nozzle-keeps-clogging</link><guid isPermaLink="true">https://asked3d.com/answers/nozzle-keeps-clogging</guid><description>Repeat clogs are usually heat creep: Prusa flags rooms above 35 °C and enclosed PLA. Wet or dirty filament, printing too cold and long retractions cause the rest.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>slicer-settings</category><category>pla</category><category>enclosures</category></item><item><title>What bed temperature does nylon need?</title><link>https://asked3d.com/answers/nylon-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/nylon-bed-temperature</guid><description>Bambu Lab sets 80 to 100 °C for its nylons on a glued PEI or Engineering plate, Prusa 110 °C on a PA Nylon sheet. Polymaker&apos;s nylons run at 25 to 50 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>nylon</category><category>bed-adhesion</category><category>build-plates</category><category>warping</category></item><item><title>What bed temperature should you use for PETG?</title><link>https://asked3d.com/answers/petg-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/petg-bed-temperature</guid><description>About 70 to 80 °C. Bambu Lab lists 60 to 80 °C for all its PETG, Prusa runs 85 then 90 °C. Put glue stick on smooth PEI or glass first.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>bed-adhesion</category><category>build-plates</category></item><item><title>Why does the nozzle clog after switching from PETG to PLA?</title><link>https://asked3d.com/answers/petg-to-pla-clog</link><guid isPermaLink="true">https://asked3d.com/answers/petg-to-pla-clog</guid><description>PETG residue stays in the hotend when PLA goes in at 190 to 230 °C. Load the PLA at the PETG temperature, 230 to 260 °C, so it pushes the old plastic out.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>pla</category><category>slicer-settings</category></item><item><title>What bed temperature should you use for PLA?</title><link>https://asked3d.com/answers/pla-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/pla-bed-temperature</guid><description>Use 55 to 60 °C on smooth or textured PEI and 35 °C on a Bambu Cool Plate. Maker guidance spans 25 to 65 °C across Basic, Matte, Silk, PLA+ and PLA-CF.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>build-plates</category><category>bed-adhesion</category><category>slicer-settings</category></item><item><title>What bed temperature does polycarbonate need?</title><link>https://asked3d.com/answers/polycarbonate-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/polycarbonate-bed-temperature</guid><description>Polycarbonate needs a 90 to 120 °C bed. Bambu Lab lists 90 to 110 °C, Polymaker 90 to 105 °C and Prusament PC Blend 110 ± 10 °C; PC-ABS takes 90 to 105 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>polycarbonate</category><category>bed-adhesion</category><category>build-plates</category><category>warping</category></item><item><title>What bed temperature should you use for TPU?</title><link>https://asked3d.com/answers/tpu-bed-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/tpu-bed-temperature</guid><description>30 to 45 °C covers most TPU. Bambu Lab lists 30 to 35 °C for its 85A, 90A, 95A HF and 68D grades; Polymaker allows 25 to 60 °C and Prusa 60 to 75 °C.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>bed-adhesion</category><category>build-plates</category></item><item><title>How do you unclog a 3D printer nozzle?</title><link>https://asked3d.com/answers/unclog-3d-printer-nozzle</link><guid isPermaLink="true">https://asked3d.com/answers/unclog-3d-printer-nozzle</guid><description>Heat the nozzle to 260 °C for PLA or 280 °C for PETG and push filament through, then use a 0.3 to 0.35 mm needle, a cold pull, and finally a nozzle swap.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>abs</category></item><item><title>How do you unclog a Bambu Lab hotend?</title><link>https://asked3d.com/answers/unclog-bambu-hotend</link><guid isPermaLink="true">https://asked3d.com/answers/unclog-bambu-hotend</guid><description>Bambu Lab&apos;s guides heat the nozzle to 250 °C for PLA, run the included pin up and down in the tip, then cold pull. If the clog survives that, swap the hotend.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category></item><item><title>Can wet filament clog a nozzle?</title><link>https://asked3d.com/answers/wet-filament-clog</link><guid isPermaLink="true">https://asked3d.com/answers/wet-filament-clog</guid><description>Yes: Bambu Lab says damp nylon, PC and fiber-filled filament are prone to clogging. Wet PLA mostly bubbles and strings. Dry PLA at 45 to 55 °C for 6 to 8 hours.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>petg</category><category>nylon</category><category>polycarbonate</category></item><item><title>What does bed temperature do in 3D printing?</title><link>https://asked3d.com/answers/what-does-bed-temperature-do</link><guid isPermaLink="true">https://asked3d.com/answers/what-does-bed-temperature-do</guid><description>It keeps the first layers stuck and stops them shrinking off the plate. Polymaker sets it just under the glass transition: PLA at 25 to 60 °C against a 61 °C Tg.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>bed-adhesion</category><category>warping</category><category>build-plates</category><category>slicer-settings</category></item><item><title>What is heat creep in 3D printing?</title><link>https://asked3d.com/answers/what-is-heat-creep</link><guid isPermaLink="true">https://asked3d.com/answers/what-is-heat-creep</guid><description>Heat rising into the heatbreak softens filament above the melt zone until it jams. PLA&apos;s glass transition is 60 °C; Bambu Lab opens the door over a 45 °C bed.</description><pubDate>Thu, 15 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>enclosures</category><category>chamber-heating</category></item><item><title>Can you 3D print car body parts?</title><link>https://asked3d.com/answers/3d-print-car-body-parts</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-car-body-parts</guid><description>Small trim, yes, in ASA and in sections: a common desktop printer builds a 256 mm cube, a Civic is 70.9 in wide, and a printed bumper cover adds no crash protection.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>asa</category><category>part-strength</category><category>warranty</category></item><item><title>Can you 3D print car engine parts?</title><link>https://asked3d.com/answers/3d-print-car-engine-parts</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-car-engine-parts</guid><description>Not internal engine parts. Suppliers rate the engine area at 125 °C (257 °F) and on-engine parts at 150 °C, above the HDT of PETG, ABS, ASA and PC filament.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>nylon</category><category>polycarbonate</category><category>asa</category></item><item><title>Can you 3D print old car parts?</title><link>https://asked3d.com/answers/3d-print-old-car-parts</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-old-car-parts</guid><description>Mercedes-Benz Classic 3D prints PA12 sunroof rollers for the W 123. What carmakers print for classic cars, and which old trim parts a home printer can copy.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>reverse-engineering</category><category>asa</category><category>home-repair</category></item><item><title>Can you 3D print refrigerator parts?</title><link>https://asked3d.com/answers/3d-print-refrigerator-parts</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-refrigerator-parts</guid><description>Yes for bin clips, shelf supports and drawer rails at 40 °F (4 °C). PETG or ABS beats PLA on impact. Gaskets, sealed-system, electrical and water-line parts stay OEM.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category><category>part-strength</category><category>petg</category></item><item><title>Can you 3D print replacement LEGO pieces?</title><link>https://asked3d.com/answers/3d-print-replacement-lego-pieces</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-replacement-lego-pieces</guid><description>Yes, for personal use. The brick patent expired in 1978, but LEGO molds to 1/200 mm and Prusa quotes 0.3 mm XY, so tune XY compensation on a test brick first.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>slicer-settings</category><category>abs</category><category>pla</category></item><item><title>What 3D printer can print car parts?</title><link>https://asked3d.com/answers/3d-printer-for-car-parts</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printer-for-car-parts</guid><description>A car-part printer needs the material&apos;s numbers: 270 °C and an 80 °C bed for PETG trim, an enclosure for ASA, 300 °C and a hardened nozzle for carbon-fiber nylon.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>enclosures</category><category>asa</category><category>nylon</category></item><item><title>Can you 3D print car parts?</title><link>https://asked3d.com/answers/can-you-3d-print-car-parts</link><guid isPermaLink="true">https://asked3d.com/answers/can-you-3d-print-car-parts</guid><description>Yes for trim, clips and mounts, never brakes, steering or airbags. Sunlit dashboards average 157 °F (69 °C), past PLA&apos;s 57 °C HDT; ASA and PC clear it.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>asa</category><category>polycarbonate</category><category>warranty</category></item><item><title>What filament should you use for 3D printed car parts?</title><link>https://asked3d.com/answers/filament-for-car-parts</link><guid isPermaLink="true">https://asked3d.com/answers/filament-for-car-parts</guid><description>A sunlit dashboard averaged 157 °F (69 °C), so dash parts need ABS, ASA or PC. Shaded cabin parts take PETG, exterior parts ASA, flexible parts TPU.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>asa</category><category>abs</category><category>tpu</category></item><item><title>How long do 3D printed parts last?</title><link>https://asked3d.com/answers/how-long-do-3d-printed-parts-last</link><guid isPermaLink="true">https://asked3d.com/answers/how-long-do-3d-printed-parts-last</guid><description>PLA showed no strength loss after a year at 25 °C, but 24 h of lab UV-B cut clear PETG&apos;s strength 36% and a hot soak halved carbon-fiber nylon&apos;s.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>part-strength</category><category>pla</category><category>asa</category></item><item><title>How to 3D print a replacement part</title><link>https://asked3d.com/answers/how-to-3d-print-replacement-parts</link><guid isPermaLink="true">https://asked3d.com/answers/how-to-3d-print-replacement-parts</guid><description>Seven steps from broken part to fitted print: check it is legal, find a model, measure to 0.01 mm, add 0.15 to 0.40 mm clearance, pick a filament, orient it, test-fit.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>reverse-engineering</category><category>home-repair</category><category>slicer-settings</category></item><item><title>How to join two 3D printed parts</title><link>https://asked3d.com/answers/join-3d-printed-parts</link><guid isPermaLink="true">https://asked3d.com/answers/join-3d-printed-parts</guid><description>CA glue for PLA, PETG, ABS and nylon, acetone for ABS and ASA, epoxy for mixed plastics, a primer for PP, and 0.15 to 0.5 mm clearances for pins, dovetails and clips.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category><category>part-strength</category><category>heat-set-inserts</category></item><item><title>Where can you download 3D printable replacement parts?</title><link>https://asked3d.com/answers/replacement-part-stl-files</link><guid isPermaLink="true">https://asked3d.com/answers/replacement-part-stl-files</guid><description>Official printable spares from Philips (seven files on Printables, October 2026), Framework and Miele, plus the five repositories where car and Dyson parts live.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category></item><item><title>Where can you get a part 3D printed?</title><link>https://asked3d.com/answers/where-to-get-a-part-3d-printed</link><guid isPermaLink="true">https://asked3d.com/answers/where-to-get-a-part-3d-printed</guid><description>Where to get a part printed in the US: libraries charging $0.10 per gram of PLA, makerspaces, and online services that quote on volume, material and machine time.</description><pubDate>Tue, 13 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category></item><item><title>Can you 3D print a gasket?</title><link>https://asked3d.com/answers/3d-printed-gaskets</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-gaskets</guid><description>Yes, in TPU for low-pressure, low-heat joints: 95A, 1.5 to 2.5 mm thick, 15 to 25% squeeze. Prusa&apos;s printed gaskets all leaked, so pressure needs a stock O-ring.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>waterproofing</category><category>watertight</category></item><item><title>Do 3D printed planters leak?</title><link>https://asked3d.com/answers/3d-printed-planter-leaking</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-planter-leaking</guid><description>Thin-walled ones do. Prusa&apos;s PLA flower pots held water; its tests needed 4 perimeters for PLA and PETG and 5+ bottom layers. Seal the inside or print a saucer.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category><category>pla</category><category>petg</category></item><item><title>Why does my 3D printed vase leak?</title><link>https://asked3d.com/answers/3d-printed-vase-leaks</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-vase-leaks</guid><description>A vase-mode wall is one line thick, so any gap leaks. Fix: 105 to 110 percent flow, a 0.6 mm outer wall, 5+ bottom layers, or coat the inside or add a liner.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category><category>slicer-settings</category></item><item><title>How to seal 3D prints for an aquarium</title><link>https://asked3d.com/answers/aquarium-safe-3d-prints</link><guid isPermaLink="true">https://asked3d.com/answers/aquarium-safe-3d-prints</guid><description>Coat the print in a sealant its maker calls fish safe once cured, such as Pond Armor Pond Shield (24 hours to cure), and use natural PLA or PETG with no added color.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>pla</category><category>petg</category></item><item><title>Are heat-set inserts reusable?</title><link>https://asked3d.com/answers/are-heat-set-inserts-reusable</link><guid isPermaLink="true">https://asked3d.com/answers/are-heat-set-inserts-reusable</guid><description>Yes, twice over: the brass thread takes a screw in and out many times, and a pulled insert can be set again in a fresh hole. What to check, and what can&apos;t be reused.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>home-repair</category></item><item><title>Which way up does a heat-set insert go?</title><link>https://asked3d.com/answers/heat-set-insert-direction</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-direction</guid><description>Which end of a heat-set insert goes into the hole first, for tapered, straight-with-pilot, symmetric and flanged inserts, from Ruthex, CNC Kitchen and SPIROL drawings.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>How deep should the hole be for a heat-set insert?</title><link>https://asked3d.com/answers/heat-set-insert-hole-depth</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-hole-depth</guid><description>Insert length and minimum blind-hole depth for M2 to M5 heat-set inserts, standard, short and Voron, from the Ruthex and CNC Kitchen size tables.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>What is a heat-set insert press and do you need one?</title><link>https://asked3d.com/answers/heat-set-insert-press</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-press</guid><description>What a heat-set insert press is, the four kinds (printable, kit, drill-press conversion, industrial) with their published specs, and when a hand-held iron is enough.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>Do you need a special soldering iron tip for heat-set inserts?</title><link>https://asked3d.com/answers/heat-set-insert-soldering-iron-tip</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-soldering-iron-tip</guid><description>No, a clean ordinary tip works, but insert tips keep inserts square and lift out cleanly. Which tip sets fit which irons, which iron works and how to use one.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>Do heat-set inserts work in TPU?</title><link>https://asked3d.com/answers/heat-set-inserts-in-tpu</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-inserts-in-tpu</guid><description>Not reliably: UltiMaker advises against heat-set inserts in flexible TPU because the plastic deforms and the insert loosens. What to use instead, and how to test.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>How to install heat-set inserts without a soldering iron</title><link>https://asked3d.com/answers/heat-set-inserts-without-soldering-iron</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-inserts-without-soldering-iron</guid><description>No-iron ways to fit heat-set inserts: a flame-heated screw, a hot plate, presses and cold options, with what controls the temperature and how each one fails.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>Helicoil or heat-set insert in a 3D print?</title><link>https://asked3d.com/answers/helicoil-vs-heat-set-insert</link><guid isPermaLink="true">https://asked3d.com/answers/helicoil-vs-heat-set-insert</guid><description>In CNC Kitchen&apos;s M3 test in PETG, a Helicoil and a heat-set insert pulled out at the same load, but the Helicoil stripped at 1 Nm against 3 Nm for the insert.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>part-strength</category><category>petg</category></item><item><title>How long does PLA last in water?</title><link>https://asked3d.com/answers/how-long-does-pla-last-in-water</link><guid isPermaLink="true">https://asked3d.com/answers/how-long-does-pla-last-in-water</guid><description>PLA showed no mass or strength loss after a year in 25 °C water in two lab studies. At 50 °C, PLA coupons lost all tensile strength within 57 days.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>watertight</category><category>waterproofing</category></item><item><title>Is 3D printed ABS waterproof?</title><link>https://asked3d.com/answers/is-abs-waterproof</link><guid isPermaLink="true">https://asked3d.com/answers/is-abs-waterproof</guid><description>Yes, if the layers don&apos;t crack: ABS held water with 2 perimeters in Prusa&apos;s tests, half what PLA needed. Acetone vapor smooths ABS and ASA, but test it for leaks.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>abs</category><category>asa</category><category>watertight</category><category>waterproofing</category></item><item><title>Is 3D printed nylon waterproof?</title><link>https://asked3d.com/answers/is-nylon-waterproof</link><guid isPermaLink="true">https://asked3d.com/answers/is-nylon-waterproof</guid><description>A nylon print holds water with 4 perimeters, but the plastic absorbs it: 2.35% for Bambu Lab PA6-CF vs 0.43% for PLA, and soaked PA6-CF can lose half its strength.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>nylon</category><category>watertight</category><category>part-strength</category></item><item><title>Is PETG waterproof?</title><link>https://asked3d.com/answers/is-petg-waterproof</link><guid isPermaLink="true">https://asked3d.com/answers/is-petg-waterproof</guid><description>PETG is insoluble and takes up 0.45% water at saturation, about the same as PLA. Prints leak at the seams: Prusa needed 4 perimeters before PETG held water.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>petg</category><category>watertight</category><category>waterproofing</category></item><item><title>Is PLA waterproof?</title><link>https://asked3d.com/answers/is-pla-waterproof</link><guid isPermaLink="true">https://asked3d.com/answers/is-pla-waterproof</guid><description>PLA plastic is: insoluble, 0.43 percent water uptake. A PLA print often leaks at the seam until it has 4 perimeters, more flow, or a coat of epoxy or lacquer.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>watertight</category><category>waterproofing</category></item><item><title>Is 3D printed TPU waterproof?</title><link>https://asked3d.com/answers/is-tpu-waterproof</link><guid isPermaLink="true">https://asked3d.com/answers/is-tpu-waterproof</guid><description>Yes, if printed well: TPU absorbs 0.18 to 1.08 percent water, and calibrated TPU walls held water 15 days in a 2023 test. Polyester TPU degrades in hot water.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>watertight</category><category>waterproofing</category></item><item><title>What hole size does an M2 heat-set insert need?</title><link>https://asked3d.com/answers/m2-heat-set-insert-hole-size</link><guid isPermaLink="true">https://asked3d.com/answers/m2-heat-set-insert-hole-size</guid><description>Hole diameter, hole depth and minimum wall for M2 and M2.5 heat-set inserts from the Ruthex and CNC Kitchen size tables, plus how much to oversize the hole in CAD.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>What hole size does an M4 heat-set insert need?</title><link>https://asked3d.com/answers/m4-heat-set-insert-hole-size</link><guid isPermaLink="true">https://asked3d.com/answers/m4-heat-set-insert-hole-size</guid><description>Hole diameter, depth and boss wall for standard and short M4 heat-set inserts: a 5.6 mm hole per Ruthex or 5.7 mm per CNC Kitchen for a 6.3 mm insert.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>What hole size does an M5 heat-set insert need?</title><link>https://asked3d.com/answers/m5-heat-set-insert-hole-size</link><guid isPermaLink="true">https://asked3d.com/answers/m5-heat-set-insert-hole-size</guid><description>Hole diameter, hole depth and minimum boss wall for standard (M5 x 9.5) and short M5 heat-set inserts, from the Ruthex and CNC Kitchen size tables.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>What hole size does an M6 heat-set insert need?</title><link>https://asked3d.com/answers/m6-heat-set-insert-hole-size</link><guid isPermaLink="true">https://asked3d.com/answers/m6-heat-set-insert-hole-size</guid><description>Hole diameter, hole depth and minimum boss wall for M6 (standard and short) and M8 heat-set inserts, from the Ruthex and CNC Kitchen size tables.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>What size heat-set inserts does a Voron use?</title><link>https://asked3d.com/answers/voron-heat-set-insert-size</link><guid isPermaLink="true">https://asked3d.com/answers/voron-heat-set-insert-size</guid><description>Voron printers use M3 heat-set inserts 5 mm across and 4 mm long (M3x5x4): the hole they need, how many each build takes, and the iron temperature for ABS and ASA.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>abs</category><category>asa</category></item><item><title>How to 3D print a waterproof box</title><link>https://asked3d.com/answers/waterproof-3d-printed-box</link><guid isPermaLink="true">https://asked3d.com/answers/waterproof-3d-printed-box</guid><description>Print ASA or PETG with 2 to 3 mm walls, seal the lid with an O-ring at 20 to 30 percent squeeze under screws, use IP68 cable glands and a vent, then test.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>watertight</category><category>asa</category><category>petg</category></item><item><title>Can you waterproof a 3D print with spray?</title><link>https://asked3d.com/answers/waterproof-spray-for-3d-prints</link><guid isPermaLink="true">https://asked3d.com/answers/waterproof-spray-for-3d-prints</guid><description>Yes, for parts without water pressure: Prusa sprays acrylic varnish inside and out a few times. Flex Seal needs 24 to 48 hours to cure and is not for drinking water.</description><pubDate>Sat, 10 Oct 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>watertight</category><category>pla</category></item><item><title>Is PLA safe for water containers?</title><link>https://asked3d.com/answers/pla-water-containers</link><guid isPermaLink="true">https://asked3d.com/answers/pla-water-containers</guid><description>PLA holds cold water: Prusa&apos;s PLA pots showed no leaks and its boxes stayed dry at 20 m. It softens above 60 °C, and Prusa does not recommend prints as food containers.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>pla</category><category>watertight</category><category>food-safety</category></item><item><title>How to match tolerances on a 3D printed replacement part</title><link>https://asked3d.com/answers/match-tolerances-replacement-part</link><guid isPermaLink="true">https://asked3d.com/answers/match-tolerances-replacement-part</guid><description>Design in clearance instead of copying the measurement: 0.15 to 0.20 mm for a snug fit, 0.20 to 0.25 mm sliding, 0.30 to 0.40 mm loose, then check with a tolerance print.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>reverse-engineering</category><category>home-repair</category></item><item><title>How to seal 3D prints with epoxy or a coating</title><link>https://asked3d.com/answers/seal-3d-prints-with-epoxy</link><guid isPermaLink="true">https://asked3d.com/answers/seal-3d-prints-with-epoxy</guid><description>Brush-on epoxy step by step from the XTC-3D data sheet, Prusa&apos;s results for epoxy, lacquer, chemical smoothing and nail polish, and the food-contact rules.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>waterproofing</category><category>watertight</category><category>food-safety</category></item><item><title>How to print a gear that lasts</title><link>https://asked3d.com/answers/3d-print-gears-that-last</link><guid isPermaLink="true">https://asked3d.com/answers/3d-print-gears-that-last</guid><description>A numbered gear recipe (material, teeth, perimeters, infill, orientation) plus the 2022 Polymers wear test where PETG gears outlasted PLA by 22.3 percent and ABS by 37.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>part-strength</category><category>petg</category><category>nylon</category></item><item><title>Can 3D printed parts hold water pressure?</title><link>https://asked3d.com/answers/3d-printed-parts-water-pressure</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printed-parts-water-pressure</guid><description>Published pressure results for printed parts: Prusa Research&apos;s 20 and 30 meter dives, a forum test at 5 to 8 bar, and the O-ring rule for threaded fittings.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category><category>pla</category><category>petg</category></item><item><title>Can you run a 3D printer in a cold garage?</title><link>https://asked3d.com/answers/3d-printer-in-cold-garage</link><guid isPermaLink="true">https://asked3d.com/answers/3d-printer-in-cold-garage</guid><description>Bambu Lab and Creality rate their printers for 10 to 30 °C ambient, and Prusa calls 20 to 30 °C ideal. What fails in a cold garage, and how to check yours.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>enclosures</category><category>chamber-heating</category><category>abs</category></item><item><title>What chamber temperature does ABS actually need?</title><link>https://asked3d.com/answers/abs-chamber-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/abs-chamber-temperature</guid><description>Bambu Lab lists a 45 to 60 °C chamber for ABS and uses 60 °C for large, warp-prone parts, well below the 101 °C glass transition on Polymaker&apos;s data sheet.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>abs</category><category>chamber-heating</category><category>warping</category><category>enclosures</category></item><item><title>Does adding a chamber heater void your printer warranty?</title><link>https://asked3d.com/answers/chamber-heater-printer-warranty</link><guid isPermaLink="true">https://asked3d.com/answers/chamber-heater-printer-warranty</guid><description>Not automatically in the US: the FTC bars voiding a warranty just for a third-party part, but makers can refuse to cover damage that part caused.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>warranty</category><category>chamber-heating</category></item><item><title>What is the difference between an enclosure and a heated chamber?</title><link>https://asked3d.com/answers/enclosure-vs-heated-chamber</link><guid isPermaLink="true">https://asked3d.com/answers/enclosure-vs-heated-chamber</guid><description>An enclosure only traps heat from the bed, about 50 °C in Polymaker&apos;s printer figures; a heated chamber adds its own heater and holds a set 60 to 65 °C.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>enclosures</category><category>chamber-heating</category><category>warping</category></item><item><title>Which filament should you use for a replacement part?</title><link>https://asked3d.com/answers/filament-for-replacement-parts</link><guid isPermaLink="true">https://asked3d.com/answers/filament-for-replacement-parts</guid><description>A decision table from what the broken part faces (heat, sun, load, chemicals) to a material class, with HDT, impact and absorption figures from manufacturer data sheets.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>petg</category><category>asa</category><category>part-strength</category></item><item><title>Are 3D printed parts safe for food-contact appliances?</title><link>https://asked3d.com/answers/food-safe-3d-printed-appliance-parts</link><guid isPermaLink="true">https://asked3d.com/answers/food-safe-3d-printed-appliance-parts</guid><description>What Prusa Research, FDA 21 CFR 177.1630 and EU Regulation 10/2011 say about printed parts that touch food: layer grooves, nozzle lead, uncertified pigments and coatings.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>food-safety</category><category>home-repair</category></item><item><title>Do you need glue stick on textured PEI?</title><link>https://asked3d.com/answers/glue-stick-on-textured-pei</link><guid isPermaLink="true">https://asked3d.com/answers/glue-stick-on-textured-pei</guid><description>Not for PLA, PETG or TPU. Prusa requires a glue stick for ABS, ASA, nylon and PC Blend on textured PEI, and Bambu Lab says those four may need one.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>bed-adhesion</category><category>build-plates</category><category>petg</category><category>abs</category></item><item><title>How strong are heat-set inserts in PLA? Pull-out figures</title><link>https://asked3d.com/answers/heat-set-insert-pull-out-strength</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-pull-out-strength</guid><description>CNC Kitchen&apos;s measured pull-out loads for M3 heat-set inserts in PLA: 181 kg for Ruthex, 157 kg for eBay inserts, 39 kg for cheap ones, and how hole size changes it.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>pla</category></item><item><title>Heat-set inserts or captive nuts for printed parts?</title><link>https://asked3d.com/answers/heat-set-inserts-vs-captive-nuts</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-inserts-vs-captive-nuts</guid><description>CNC Kitchen&apos;s M3 test in PETG: a bottom-pocket nut held 166 kg against 119 kg for a heat-set insert, but the insert took more torque. When each fastening wins.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>petg</category></item><item><title>How often should you wash a PEI build plate?</title><link>https://asked3d.com/answers/how-often-wash-pei-plate</link><guid isPermaLink="true">https://asked3d.com/answers/how-often-wash-pei-plate</guid><description>Wash it when prints stop sticking, not on a schedule. Prusa wipes with about 90% IPA and saves soap for a last resort; neither maker allows acetone on textured PEI.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>build-plates</category><category>bed-adhesion</category></item><item><title>What nozzle temperature does nylon actually need?</title><link>https://asked3d.com/answers/nylon-nozzle-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/nylon-nozzle-temperature</guid><description>Nylon data sheets put the nozzle at 250 to 300 °C: copolymers start lowest, PA6, PA12 and fiber-filled grades run 260 to 290 °C. Ranges, beds and drying by type.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>nylon</category><category>slicer-settings</category></item><item><title>Which print orientation makes a replacement part strongest?</title><link>https://asked3d.com/answers/print-orientation-for-strong-parts</link><guid isPermaLink="true">https://asked3d.com/answers/print-orientation-for-strong-parts</guid><description>Lay the load along the layers: Bambu Lab PETG Basic pulls 51 MPa in XY and 35 MPa in Z, and CNC Kitchen&apos;s PLA coupons gained 27 percent tilted to 45 degrees.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>part-strength</category><category>replacement-parts</category><category>home-repair</category></item><item><title>Why did my print warp on only one corner?</title><link>https://asked3d.com/answers/print-warped-one-corner</link><guid isPermaLink="true">https://asked3d.com/answers/print-warped-one-corner</guid><description>One lifted corner has less grip or more cooling than the other three. Five causes to check: bed height, a draft, a cool bed zone, skin oil and a sharp corner.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>warping</category><category>bed-adhesion</category></item><item><title>Is it safe to print ABS indoors without ventilation?</title><link>https://asked3d.com/answers/printing-abs-without-ventilation</link><guid isPermaLink="true">https://asked3d.com/answers/printing-abs-without-ventilation</guid><description>Azimi et al. measured ABS emitting hundreds of times more ultrafine particles than PLA, plus styrene. What the studies found and the ventilation they advise.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>abs</category><category>ventilation-safety</category><category>enclosures</category><category>pla</category></item><item><title>How to design snap-fit clips for replacement parts</title><link>https://asked3d.com/answers/snap-fit-replacement-clips</link><guid isPermaLink="true">https://asked3d.com/answers/snap-fit-replacement-clips</guid><description>Cantilever clip rules from Bayer&apos;s snap-fit guide: taper the arm to half its root thickness, fillet the root, keep strain under 2.5 to 4 percent, print the arm flat.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>snap-fits</category><category>replacement-parts</category><category>part-strength</category></item><item><title>Why won&apos;t TPU come off the build plate?</title><link>https://asked3d.com/answers/tpu-stuck-to-build-plate</link><guid isPermaLink="true">https://asked3d.com/answers/tpu-stuck-to-build-plate</guid><description>TPU welds itself to a hot bed, a squashed first layer or bare smooth PEI. Bambu Lab lists 35 to 45 °C on PEI plates. The causes, the fixes and a safe way to peel it.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>tpu</category><category>bed-adhesion</category><category>build-plates</category></item><item><title>Which filament is waterproof? Materials for parts that hold water</title><link>https://asked3d.com/answers/waterproof-filament-for-3d-printing</link><guid isPermaLink="true">https://asked3d.com/answers/waterproof-filament-for-3d-printing</guid><description>PLA, PETG, ASA, PP and PC compared for holding water: the perimeter count Prusa needed, data-sheet water absorption, heat limits and outdoor use.</description><pubDate>Wed, 23 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>petg</category><category>asa</category><category>pla</category></item><item><title>Heat-set inserts for 3D prints: sizes, temperatures and installation</title><link>https://asked3d.com/guides/heat-set-inserts</link><guid isPermaLink="true">https://asked3d.com/guides/heat-set-inserts</guid><description>What brass heat-set inserts are, the M2 to M5 size families with hole and wall figures, the iron temperature rule, and the 181 kg M3 pull-out from CNC Kitchen&apos;s test.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>part-strength</category></item><item><title>3D printing replacement parts: what works, what lasts, what is legal</title><link>https://asked3d.com/guides/3d-printed-replacement-parts</link><guid isPermaLink="true">https://asked3d.com/guides/3d-printed-replacement-parts</guid><description>Printed parts are weakest across layers: Bambu Lab PETG Basic pulls 51 MPa in XY and 35 MPa in Z; Prusament PETG&apos;s interlayer adhesion is 18 MPa against 47 MPa flat.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category><category>part-strength</category><category>reverse-engineering</category></item><item><title>Are 3D prints waterproof? How to make a print watertight</title><link>https://asked3d.com/guides/watertight-3d-prints</link><guid isPermaLink="true">https://asked3d.com/guides/watertight-3d-prints</guid><description>Prints leak by default. Prusa Research&apos;s fix: 4 to 6 perimeters, 105 to 110 percent flow, 0.15 mm layers, one vase-mode wall, and epoxy for parts that must stay sealed.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category><category>slicer-settings</category></item><item><title>Is it legal to 3D print replacement parts?</title><link>https://asked3d.com/answers/is-it-legal-to-3d-print-replacement-parts</link><guid isPermaLink="true">https://asked3d.com/answers/is-it-legal-to-3d-print-replacement-parts</guid><description>What utility patents, design patents, trademarks and copyright each cover on a replacement part, the term of each, and how the repair doctrine applies to printing one.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category><category>warranty</category></item><item><title>What temperature to set the iron for heat-set inserts in PLA, PETG and ABS</title><link>https://asked3d.com/answers/heat-set-insert-temperature</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-insert-temperature</guid><description>Iron temperature per material for heat-set inserts: about 225 °C for PLA, 245 °C for PETG and 265 °C for ABS, from CNC Kitchen&apos;s printing temperature plus 10 to 20 °C.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>pla</category><category>petg</category><category>abs</category></item><item><title>Do heat-set inserts work in PETG?</title><link>https://asked3d.com/answers/heat-set-inserts-in-petg</link><guid isPermaLink="true">https://asked3d.com/answers/heat-set-inserts-in-petg</guid><description>Yes: brass heat-set inserts hold in PETG at an iron temperature of about 245 °C, and the part stays rigid to a glass transition near 80 °C. Expect stringing from the tip.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>petg</category><category>threads-and-fasteners</category></item><item><title>How to install heat-set inserts straight without a press</title><link>https://asked3d.com/answers/install-heat-set-inserts-straight</link><guid isPermaLink="true">https://asked3d.com/answers/install-heat-set-inserts-straight</guid><description>A soldering-iron procedure for square, flush heat-set inserts: iron 10 to 20 °C above printing temperature, melt about 90 % of the way, finish with a flat tool.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item><item><title>How to measure a broken part for 3D printing without a scanner</title><link>https://asked3d.com/answers/measure-broken-part-without-3d-scanner</link><guid isPermaLink="true">https://asked3d.com/answers/measure-broken-part-without-3d-scanner</guid><description>A digital-caliper procedure for outside, inside, depth and step measurements, with Mitutoyo&apos;s ±0.02 mm accuracy set against Prusa&apos;s 0.3 mm printer tolerance.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>reverse-engineering</category><category>home-repair</category></item><item><title>How to remove or straighten a crooked heat-set insert</title><link>https://asked3d.com/answers/remove-crooked-heat-set-insert</link><guid isPermaLink="true">https://asked3d.com/answers/remove-crooked-heat-set-insert</guid><description>Reheat a tilted insert at 20 °C above printing temperature (240 °C for PLA) and press it flush, or pull it out on a screw in about 10 seconds; drill 5.6 mm for an M4.</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category><category>home-repair</category></item><item><title>How to test a 3D print for leaks before you trust it</title><link>https://asked3d.com/answers/test-3d-print-for-leaks</link><guid isPermaLink="true">https://asked3d.com/answers/test-3d-print-for-leaks</guid><description>A fill-and-observe leak test on a dry tissue with two sourced pass points: dry after one night (Prusa Research, closed models) and dry after 48 hours (Bambu Lab, vases).</description><pubDate>Mon, 21 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category></item><item><title>Which filament survives a dishwasher?</title><link>https://asked3d.com/answers/filament-for-dishwasher-parts</link><guid isPermaLink="true">https://asked3d.com/answers/filament-for-dishwasher-parts</guid><description>Manufacturer HDT and Tg figures for PLA, PETG, ABS, ASA, nylon, PC and PP set against the 150 °F dishwasher sanitize rinse, with margins in °C.</description><pubDate>Tue, 15 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>replacement-parts</category><category>home-repair</category><category>petg</category><category>abs</category></item><item><title>How many walls make a 3D print watertight?</title><link>https://asked3d.com/answers/how-many-walls-for-watertight-prints</link><guid isPermaLink="true">https://asked3d.com/answers/how-many-walls-for-watertight-prints</guid><description>Four perimeters held water in PLA and PETG in Prusa&apos;s tests, two in ABS and PP, and one vase-mode wall in every material. Flow and layer height matter too.</description><pubDate>Tue, 15 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>watertight</category><category>waterproofing</category><category>slicer-settings</category></item><item><title>What hole size does an M3 heat-set insert need?</title><link>https://asked3d.com/answers/m3-heat-set-insert-hole-size</link><guid isPermaLink="true">https://asked3d.com/answers/m3-heat-set-insert-hole-size</guid><description>Hole diameter, hole depth and minimum boss wall for standard, short and Voron M3 heat-set inserts, taken from the Ruthex and CNC Kitchen size tables.</description><pubDate>Tue, 15 Sep 2026 00:00:00 GMT</pubDate><dc:creator>Asked 3D Content Team</dc:creator><category>heat-set-inserts</category><category>threads-and-fasteners</category></item></channel></rss>